Metal Primers For Steel Fabrication and Industrial facilities – How to Select the right Product

Metal Primers For Steel Fabrication and Industrial facilities – How to Select the right Product

There are now many other metal primers on the market other than the old “shop primer” most steel fabrication and industrial facilities use. Don’t get me wrong, shop primer still has its place. For a product that you can buy for a very minimal price per gallon, you can get a minimal amount of protection needed for structural metal that will be covered up at some point.CCI primers

Universal metal primers have certainly made a big splash. When looking for one, make sure you select a universal metal primer that can take a variety of topcoats. Many universal metal primers now are able to receive a variety of topcoats including alkyds, acrylics, urethane, silicone-alkyds, and epoxies. For large jobs, it is still possible to find a paint vendor that can supply a product such as this for a very reasonable price.

Fast dry epoxy primers have become popular selections to put under urethane and epoxy topcoats. These products dry quickly and are easy to spray, the only drawback here is that you most likely will need better surface preparation (SP6 commercial blast). You will also need to mix an “A” and “B” component and allow the appropriate “sweat in” time before spraying. Their costs are usually just slightly higher than the single-component universal metal primers.

“Wet on wet” metal primers have also been in the mix here recently. These are metal primers that can have a topcoat applied in as little as 20 minutes. They also can receive a variety of topcoats like urethane and epoxies. For a shop that is looking for premium production times, these types of products can certainly be the ticket. Amazingly, costs on these primers are very similar to the universal metal primers on the market.

Leave a Comment

Your email address will not be published.